Series F Large Capacity Two Component AB Cartridge for epoxy, silicone, polyurethane and structural adhesives, 200ml, 400ml, 1500ml 1:1, 2:1, 4:1, 10:1

AB Adhesive Cartridge

AB Cartridge Model:Wefill-F-CD
Applicable Material:PP, PBT, PA, Matte Finish, Transparent
Volume:200ml, 400ml, 1500ml
Applicable Ratio:1:1, 2:1, 4:1, 10:1
End Cap:White, Gray, Yellow, Red, Pink, Closed-End

INQUIRY

DESCRIPTION PARAMETERS CONFIGURATION APPLICATION

The Series F Large-Capacity AB Cartridge is an industrial-grade dual-barrel cartridge designed for high-volume storage, filling and dispensing of two-component adhesives and sealants. Available in 1:1, 2:1, 4:1 and 10:1 mixing ratios, with both 1st and 2nd generation versions.

Each complete set includes a Locking Nut, End Cap, Cartridge Body, Wiper Piston and Vent Plug, featuring a round dual-outlet interface for secure connection with MF-Series mixing nozzles. The 1500 Series offers even larger capacity for extended dispensing operations. Fully compatible with standard manual AB dispensing guns.

Key Features

· Large-Capacity Design — High-volume dual-barrel structure for extended dispensing, reducing frequent refills in production environments

· Four Mixing Ratios — Available in 1:1, 2:1, 4:1 and 10:1 to match a wide range of adhesive formulations

· Locking Nut Interface — Threaded locking nut secures the mixing nozzle firmly, preventing detachment during high-pressure dispensing

· Round Dual-Outlet Connection — Compatible with MF-Series mixing nozzles for both 1:1 and 10:1 ratio applications

· Sealed Vent Plug System — Press-fit vent plug enables bubble-free filling and prevents adhesive backflow after sealing

· Wiper Piston Extrusion — Matched wiper piston ensures smooth, uniform glue output with minimal residue inside the barrel

· Broad Material Compatibility — Works with epoxy resin, silicone, PU adhesive, UV glue, acrylic and two-part structural sealants

· Manual & Automated Use — Fits standard manual AB dispensing guns and adapts to automated dispensing stations

· 1500 Series Available — Extra-large capacity option for high-throughput industrial filling and dispensing operations

F Series轮播图

Series F Ratio Nozzel Dispensing

Precision Manufacturing

MACHINE DESCRIPTION

The Series F Large-Capacity AB Cartridge is a professional dual-barrel packaging solution engineered for high-volume two-component adhesive manufacturers, sealant fillers and industrial dispensing operations. The cartridge body features two isolated chambers that store Part A and Part B materials separately, preventing cross-contamination and premature curing before use.

With four mixing ratio options (1:1, 2:1, 4:1, 10:1) and both 1st and 2nd generation versions available, the Series F cartridge covers the widest range of adhesive formulations in the large-capacity segment. It is widely adopted across construction structural glazing, automotive assembly, electronics potting, industrial bonding and high-volume adhesive manufacturing.

1. Mixing Ratios Options

The Series F cartridge is offered in four standard mixing ratios:

Ratio	Typical Applications	Compatible Mixing Nozzle
1:1	Generalpurpose epoxy, silicone & acrylic adhesives	MFSeries (1:1)
2:1	Polyurethane(PU) adhesives, structural epoxy resins	MFSeries (2:1)
4:1	Specialgrade structural bonding epoxies	MFSeries (4:1)
10:1	Highstrength industrial epoxy adhesives	MFSeries (10:1)

2.Cartridge Construction & Components

Component	Function
Locking Nut	Threaded nut that secures the mixing nozzle to the cartridge outlet, preventing detachment under pressure
End Cap	Front sealing cap that protects the cartridge opening and keeps contents clean before use
Cartridge Body	Main dual-chamber container for storing two-component adhesives
Wiper Piston	Sealing piston that pushes material out cleanly, leaving minimal residue inside the barrel
Vent Plug	Venting plug that allows air release during filling and prevents backflow after sealing

3. Round Dual-Outlet Interface Advantage

The Series F cartridge features a round dual-outlet interface with a threaded locking nut:
Dual outlet ports align precisely with MF-Series static mixing nozzles
Locking nut provides higher sealing pressure for high-viscosity materials
Round interface ensures uniform material flow from both chambers
Quick nozzle changes without tools — simply unscrew the locking nut

4. Compatible Materials

The Series F cartridge is suitable for a wide range of two-part materials, including:

· Epoxy resin and structural epoxy adhesives

· Silicone sealants and structural glazing compounds

· PU (polyurethane) adhesives and sealants

· UV-curable dual-component glues

· Acrylic structural adhesives

· Methyl methacrylate (MMA) adhesives

· Other two-part potting, bonding and sealing compounds

Send Your Inquiry Now

PARAMETERS

Series F Cartridge

Capacity / Ratio	Item Code	Model / Full Name	Material	Large Barrel ID (mm)	Large Barrel OD (mm)	Small Barrel ID (mm)	Small Barrel OD (mm)	Capacity (ml)	Length (mm)
200ml 1:1	03010097	Wefill-F-CD200-11-PP-01-STD	PP	32.42	36.54	-	-	200	145.38
200ml 2:1	03010120	Wefill-F-CD200-21-PP-01-STD	PP	38.7	43.69	27.38	30.65	200	145.38
200ml 10:1	03010038	Wefill-F-CD200-101-PP-02-STD	PP	49.29	54.75	15.16	19.54	200	145.38
200ml 10:1	03010216	Wefill-F-CD200-101-PBT-01-STD	PBT	49.29	54.75	15.16	19.54	200	145.38
400ml 1:1	03010086	Wefill-F-CD400-11-PP-02-STD	PP	39.8	44.69	-	-	400	183.07
	03010091	Wefill-F-CD400-11-PBT-02-STD	PBT	39.8	44.69	-	-	400	183.07
	03010093	Wefill-F-CD400-11-PA-02-STD	PA	39.8	44.69	-	-	400	183.07
400ml 2:1	03010246	Wefill-F-CD400-21-PP-01-STD	PP	45.59	52.44	32.68	37.26	400	183.07
400ml 4:1	03010122	Wefill-F-CD400-41-PP-02-STD	PP	51.91	57.35	25.81	28.95	400	183.07
	03010123	Wefill-F-CD400-41-PA-02-STD	PA	51.91	57.35	25.81	28.95	400	183.07
	03010124	Wefill-F-CD400-41-PBT-02-STD	PBT	51.91	57.35	25.81	28.95	400	183.07
400ml 10:1	03010039	Wefill-F-CD400-101-PBT-01-STD	PBT	60.76	66.52	19.24	23.68	400	183.07
400ml 10:1	03010090	Wefill-F-CD400-101-PP-01-STD	PP	60.76	66.52	19.24	23.68	400	183.07

Large Capacity Series F.png

Capacity / Ratio	Item Code	Model / Full Name	Material	Large Barrel ID (mm)	Large Barrel OD (mm)	Small Barrel ID (mm)	Small Barrel OD (mm)	Capacity (ml)	Length (mm)
1500ml 1:1	03010206	Wefill-C-CD1500-11-PP-01-STD	PP	74.68	78.89	-	-	1500	253
	03010028	Wefill-C-CD1500-11-PP-02-STD	PP	74.68	78.89	-	-	1500	253
	03010310	Wefill-F-CD1500-11-PP-01-STD	PP	74.68	78.89	-	-	1500	253

CONFIGURATION

How to Use

Step 1 — Filling the Cartridge

1. Remove the end cap and vent plug from the cartridge body.

2. Fill Part A material into the A chamber and Part B material into the B chamber separately.

3. Keep the vent plug open during filling to allow air escape and prevent bubble formation.

4. Once filled, reinsert the vent plug and press it down firmly to seal — this prevents backflow.

5. Install the wiper pistons into each chamber.

Step 2 — Assembling the Mixing Nozzle

1. Remove the end cap from the front of the cartridge.

2. Align the C-Series threaded mixing nozzle with the cartridge outlet.

3. Screw on the nut cap clockwise until tight — the threaded twist-lock design ensures a secure fit.

4. Secure the metal clip into position for secondary locking (for high-pressure applications).

5. The mixing nozzle will combine Part A and Part B uniformly as the adhesive is dispensed.

Send Your Inquiry Now

Step 3 — Dispensing

1. Load the assembled cartridge into a standard manual AB dispensing gun (or place it into an automated dispensing station).

2. Squeeze the gun trigger gradually — the wiper pistons push both materials through the mixing nozzle simultaneously.

3. The mixed adhesive exits the nozzle tip ready for direct application.

4. For best results, maintain steady and even pressure during dispensing.

Step 4 — Storage & Maintenance

1. After filling, keep the end cap installed if not in immediate use to prevent contamination.

2. Store filled cartridges upright in a cool, dry place away from direct sunlight.

3. Replace wiper pistons and vent plugs periodically for optimal sealing performance.

4. Do not interchange Series C threaded components with B/BS series bayonet-style components.

Important Notes

l Series C cartridges use threaded twist-lock interface — only compatible with C-Series threaded mixing nozzles.

l The metal clip and nut cap must both be secured before high-pressure dispensing to prevent nozzle detachment.

l Always test material compatibility with the cartridge before bulk filling.

Send Your Inquiry Now

APPLICATION

Our Series F two component AB cartridges are trusted across industries

Industry	Typical Applications
Construction	Structural glazing and bonding
Renovation & Decoration	Tile fixing, countertop installation, repair work
Automated Equipment	Robotic dispensing lines, high-volume production

Series C Applications Industries(1)

Series F Large Capacity Two Component AB Cartridge for epoxy, silicone, polyurethane and structural adhesives, 200ml, 400ml, 1500ml 1:1, 2:1, 4:1, 10:1

The Series F Large-Capacity AB Cartridge is an industrial-grade dual-barrel cartridge designed for high-volume storage, filling and dispensing of two-component adhesives and sealants. Available in 1:1, 2:1, 4:1 and 10:1 mixing ratios, with both 1st and 2nd generation versions.

Key Features

1. Mixing Ratios Options

2.Cartridge Construction & Components

3. Round Dual-Outlet Interface Advantage

4. Compatible Materials

How to Use

Step 1 — Filling the Cartridge

1. Remove the end cap and vent plug from the cartridge body.

2. Fill Part A material into the A chamber and Part B material into the B chamber separately.

3. Keep the vent plug open during filling to allow air escape and prevent bubble formation.

4. Once filled, reinsert the vent plug and press it down firmly to seal — this prevents backflow.

5. Install the wiper pistons into each chamber.

Step 2 — Assembling the Mixing Nozzle

1. Remove the end cap from the front of the cartridge.

2. Align the C-Series threaded mixing nozzle with the cartridge outlet.

3. Screw on the nut cap clockwise until tight — the threaded twist-lock design ensures a secure fit.

4. Secure the metal clip into position for secondary locking (for high-pressure applications).

5. The mixing nozzle will combine Part A and Part B uniformly as the adhesive is dispensed.

Step 3 — Dispensing

1. Load the assembled cartridge into a standard manual AB dispensing gun (or place it into an automated dispensing station).

2. Squeeze the gun trigger gradually — the wiper pistons push both materials through the mixing nozzle simultaneously.

3. The mixed adhesive exits the nozzle tip ready for direct application.

4. For best results, maintain steady and even pressure during dispensing.

Step 4 — Storage & Maintenance

1. After filling, keep the end cap installed if not in immediate use to prevent contamination.

2. Store filled cartridges upright in a cool, dry place away from direct sunlight.

3. Replace wiper pistons and vent plugs periodically for optimal sealing performance.

4. Do not interchange Series C threaded components with B/BS series bayonet-style components.

Important Notes

Products

Support